Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Alhambra
Chimney repair in Alhambra usually falls into two buckets: liner work and masonry work. A cracked clay tile liner in a 1920s Spanish Colonial costs $2,400 – $4,800 to reline with a HeatShield system, while flashing repair on those same homes typically runs $450 – $900. Most repair jobs we do in Alhambra are finished in a single visit, and you get a written price before anyone picks up a tool. Call Hadley Chimney West Covina at (661) 402-9036 and a live person answers, any hour, any day.
Alhambra’s housing stock is different from what you’ll find ten minutes away in Monterey Park or San Gabriel. The homes here run older, mostly 1920s through 1950s, and many of those original chimneys were built with unlined brick or thin clay tile. That matters because the way those chimneys fail is specific to this city’s history, its soil, and even the Santa Ana winds that rake down from the San Gabriels. When you book with us, the tech shows up in a tracked window with a camera, and nothing gets recommended unless you see the evidence yourself.
Key Takeaways:
- Repair pricing in Alhambra runs $450 – $4,800 depending on whether you need flashing, mortar work, or a full liner.
- Older unlined chimneys are the biggest hidden issue in this city’s housing stock, and camera inspection is the only way to confirm their condition.
- Every repair comes with a written guarantee and a free second visit if it fails, backed by the 365-Day Done Right Promise.
- We match vintage brick for Bean Tract homes so repairs don’t scar a historic facade.
Why Hadley Chimney West Covina Is Alhambra’s Preferred Chimney Repair Company
Hadley Chimney Sweep has been doing this work since 2003, and Cory Mitchell, who leads our crews, has seen just about every failure mode an old Southern California chimney can produce. Alhambra customers repeatedly tell us the same thing: they wanted a company that would show them what was wrong instead of just telling them. That’s what we do. Every tech who comes to your home in Alhambra is background-checked, uniformed, and carrying a camera that feeds photos into a digital report you can open on your phone while you’re standing in your living room.
We also don’t play the vague-arrival-window game. You get a live arrival time, the way you track a rideshare. If you’re near Alhambra Park or up in the hillside streets off Atlantic, you’ll know exactly when we pull up. Phone calls go to a real person 24/7, not a voicemail loop. And if our repair doesn’t hold up, the written guarantee means a second visit at no charge. That’s the 365-Day Done Right Promise, and it’s not a promotion. It’s how we’ve always worked.
As part of the Relay Home Co. family, we operate under the Relay Visibility Guarantee, which means your invoice is digital, your price is written before work starts, and your before-and-after photos are included in the record. No “trust me” upselling. No surprise add-ons at the door.
Styles & brands we work with





Chimney Liner Installation in Alhambra
Chimney Liner Installation is the single most common repair we recommend in Alhambra because so many homes here were built before modern liner codes existed. A chimney liner is exactly what it sounds like: a new flue installed inside the old chimney structure to contain heat and combustion gases. When a 1930s clay tile liner cracks, which it often does after decades of seismic settling and Santa Ana downdrafts, flue gases can leak into the wall cavity or attic before they ever reach the cap. In a hillside neighborhood near Alhambra Park, where lots shift slightly over time, that failure is even more common. Relining an Alhambra chimney with HeatShield or a DuraFlex stainless steel system typically runs $2,400 – $4,800 depending on flue length and accessibility.
When Relining Makes Sense
You need a liner inspection if your home still has its original unlined brick flue, if you’ve converted a fireplace to gas, or if a camera scan shows vertical cracks in the clay tile. We don’t recommend relining on a hunch. You’ll see the video yourself.
HeatShield and DuraFlex Options
HeatShield is a ceramic compound we apply inside the existing flue to seal cracks and create a smooth, fire-resistant surface. It costs less than a full stainless liner and works well for moderate cracking. For heavily deteriorated chimneys, a DuraFlex stainless liner is the longer-term answer. Both carry our written guarantee.
Chimney Flashing Repair in Alhambra
Chimney Flashing Repair addresses the metal barrier where your chimney meets the roof, and in Alhambra it’s a job we do constantly on the low-slope and flat-roofed Spanish Colonial styles that cover neighborhoods around Alhambra Park and the Bean Tract. Flashing is the thin metal (usually galvanized steel, aluminum, or copper) that’s bent and sealed around the chimney base to keep water from running down into the house. When it fails, water gets in, erodes the mortar crown, and eventually finds its way into the firebox. Flashing repair in Alhambra typically costs $450 – $900 for a standard single-flue chimney.
Water Intrusion After Heavy Rain
Alhambra gets most of its rain in a few intense winter bursts, not steady drizzle. That pattern is hard on flashing. A small gap that’s fine for months suddenly channels real water during a January storm. If you notice water stains on the ceiling near your fireplace after rain, the flashing is the first thing we check with the camera.
Flat Roof Complications
Many Alhambra homes have flat or very low-slope roof sections. Flashing on those roofs needs a different pitch and sealant approach than on a steep shingle roof, and mistakes here are common with less experienced crews. We’ve repaired more than a few flashing jobs done wrong by handymen who treated a flat roof like a peaked one.
Trusted Brands We Service in Alhambra
We stock parts for HeatShield, Gelco, and Olympia Chimney systems, which means Alhambra customers don’t wait on a special order when a repair needs to move. HeatShield gets used heavily here for older clay tile liners with moderate cracking. Gelco waterproofing treatments help protect exterior brick from spalling during our wet winters. Olympia Chimney caps and dampers are common on the Spanish Colonial and Craftsman homes where decorative chimney tops are part of the original design. When you need a repair that involves one of these brands, we can usually complete the job that day without sending you a “parts are on order” email.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Alhambra Homes
- Unlined 1920s brick chimneys with spalling mortar. Decades of minor seismic movement have loosened joints, and flue gases leak into wall cavities. This is especially common on hillside lots near Alhambra Park where the soil shifts more.
- Cracked clay tile liners from Santa Ana downdrafts. Strong winds driving down the chimney create pressure and temperature swings that stress old tile. A sweep alone won’t find these; you need a camera.
- Flashing failures on flat and low-slope roofs. The Spanish Colonial and Minimal Traditional homes here often have roof lines that pool water differently, and a flashing repair done for a steep roof simply won’t hold.
- Decorative brick matching in the Bean Tract. When the chimney facade matches the home’s brick, a standard red-brick patch ruins the curb appeal. We source vintage brick and color-match mortar to keep it seamless.
Pricing for Chimney Repair in Alhambra, CA
Here’s what you can expect to pay in Alhambra. Chimney Repair on a flashing issue runs $450 – $900. Mortar repointing and tuckpointing on a typical 1930s chimney runs $600 – $1,500 depending on the amount of joint work. A HeatShield liner for a moderately cracked clay tile flue costs $2,400 – $3,600, and a full stainless DuraFlex reline can reach $4,800 on a taller chimney. Spalling brick repair or partial rebuilding runs $1,200 – $3,000. These are honest ranges for this market, and the written price you get before work starts won’t drift once the tech is on the roof. Call (661) 402-9036 for a free estimate and we’ll give you exact numbers.
We Also Serve Cities Near Alhambra
Our crews handle Chimney Repair in Alhambra and the surrounding communities. If you’re in Pico Rivera, Whittier, West Covina, or Hacienda Heights, the same tracked arrival, camera report, and written guarantee apply. The housing stock changes a bit from city to city, but the standard doesn’t.
Serving Alhambra, CA - Our Local Coverage Area
We’re based in the Alhambra area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Alhambra
Yes. A standard visual sweep check won’t reliably find cracked clay tile inside a curved or narrow flue in older Spanish Colonial designs. Alhambra’s pre-1950 chimneys often have unusual flue dimensions and need a camera inspection with a flexible scope. We run the camera up the full flue length and show you the footage before any recommendation. Call (661) 402-9036 to book an inspection and get the video for yourself.
It adds cost and time when the damaged brick is visible on the home’s facade. Matching vintage buff or rose-colored brick from the 1920s and 1930s means sourcing from salvage yards or specialty suppliers, which can add $200 – $500 to a repair and a few extra days for sourcing. We plan for that and tell you upfront. The written price covers the matching before we start.
Yes, because Santa Anas drive rain sideways and push water under flashing that’s sealed only for vertical rainfall. On Alhambra homes near the base of the San Gabriel foothills, wind-driven rain gets forced under the flashing edge and into the mortar crown. A visual check in dry weather won’t catch it. We test with a water trace and camera during the inspection, and the fix usually runs $450 – $900 for proper flashing sealant and repair.
They may be grandfathered, but that doesn’t mean they’re safe to use. Alhambra’s 1920s and 1930s homes predate modern liner requirements, and some still have raw brick flues. Grandfathered status means the city won’t force a liner, but if you use the fireplace, heat and creosote are pushing directly against old brick and mortar. We recommend a camera inspection and a HeatShield or DuraFlex liner for any use. Relining runs $2,400 – $4,800 depending on flue condition. Call (661) 402-9036 for an exact quote.
Heavy rain soaks the mortar crown and flashing, and when water reaches the firebox it creates steam that pushes smoke back into the room. A small crown crack can sit relatively dry in light rain and only open up in a real storm. The fix usually involves crown repair and flashing resealing, which in Alhambra runs $450 – $1,200 combined. We’ll confirm with a camera before recommending anything.
If your chimney’s been acting up, or if you just want an honest look at what’s going on inside, call Hadley Chimney West Covina at (661) 402-9036. A real person answers, we schedule you a tracked window, and the price you get before we start is the price you pay. No pressure, no mystery, just photos and a written guarantee on every repair we do.
Written by Cory Mitchell, Owner at Hadley Chimney West Covina, serving Alhambra since 2003.